Robotech Schweisstechnik GmbH

Robot welding torches air liquid cooled, quick change torch heads, TIG welding torches manual and robotic, torch cleaning station for all kind of nozzle, wire cutting station DAS, wire cutter, anti-spatter spray injector, torch neck alignment jig, welding robots with centrally guided cable assembly, robot torch mount, complete solution to service the torch neck, all welding torches, anti-spatter fluid, wire cutting fixture.

Robotech'snozzle cleaning station is designed for manufacturers using robotic Mig welding guns. The system can be used with all brands of robotic Mig welding guns: for applications using hard or soft wires and all nozzle-contact tip combinations.

The stations are designed to lower production costs by reducing robot weld cycle time. All operations take place after one robot move of the torch. Multiple torch movements that waste valuable time are eliminated.

When fully equipped, the systems are designed to trim the weld wire, clean the nozzle and contact tip of built-up weld spatter, and apply anti-spatter compound. All service operations are completed in less than six seconds.

The robot moves the welding gun to the cleaning station. As the welding gun enters the station, the welding wire may be trimmed. Once in position, the nozzle is gripped firmly in a clamping jaw and the nozzle reaming blade is activated. Turning at high speed, the reamer blade enters the nozzle and cleans away built-up spatter from the nozzle and contact tip area. As the reamer retracts, a mist of anti-spatter compound is directed into the nozzle through the reamer blade, thus providing a protective coating to the nozzle and contact tip. An ample supply of liquid anti-spatter compound is held in an enclosed container accessible at the rear of the system. For robotic MIG guns do not hesitate to contact us - we supply a full line of air and liquid cooled robotic MIG torches - as well as Hollow Wrist torch systems.

Related Suppliers By Main Products