Inteco Limited specializes in the manufacture of refractory castables for the manufacture of monolithic refractory linings of heating units in various industries (metallurgical, chemical, petrochemical, energy, construction, pulp and paper, and many others).
The main advantages of monolithic linings in comparison with the brick:
Manufacturability laying and installation;
The absence of multiple joints;
Ability to manufacture products of any shape;
Significantly lower labor costs during installation;
Maintainability of the lining;
Today, the modern state of technology allows you to hydraulically hardening dry refractory mixture for the manufacture of concrete, which are not inferior, and often outperform shaped refractories (bricks) in all major properties.
With approximately 50 items of raw materials we produce about 10000 tons per year of mixtures and products with a wide range of properties, with a temperature of 2000 0C, with a density of 0.4 g/cm3 to 3.5 g/cm3, the strength up to 150 N/mm2, containing up to 99.8% Al2O3.
From a wide range of concretes produced by us is always possible to choose the material best suited to the specific operating conditions with the optimum combination of fire resistance, heat resistance, thermal conductivity, strength.
Mixtures can be applied pouring, vibroformovaniem, gunning packing. We can manufacture at our manufacturing products the most complex configuration with a mass of several kilograms to 10-15 tons.
Our refractories for many years successfully operated on hundreds of companies in various industries.
Products manufactured in accordance with the specifications, has hygiene certificates. Each lot is accompanied by a certificate of quality and the instructions for use. The production has all necessary licenses. We design and furnace linings, advise on selection of refractory compounds, provide technical assistance in the lining works.
Quality Policy Inteco Limited
To achieve the goals we set ourselves the following objectives:
the output of consistent quality that meets the requirements and expectations of customers;
development and implementation of new processes and technologies;
development of mutually beneficial and long-term cooperation with partners;
the creation and use of monitoring systems to measure and evaluate customer satisfaction and loyalty the company's products;
systematic training and competence of all personnel;
The solution of these problems is provided by the following principles:
Inteco Limited product quality is determined by the needs of the client;
study of its needs and expectations can anticipate and overcome them;
continuous analysis and improvement of production processes and provide superior quality products has been increasing steadily Inteco Limited;
The main advantages of monolithic linings in comparison with the brick:
Manufacturability laying and installation;
The absence of multiple joints;
Ability to manufacture products of any shape;
Significantly lower labor costs during installation;
Maintainability of the lining;
Today, the modern state of technology allows you to hydraulically hardening dry refractory mixture for the manufacture of concrete, which are not inferior, and often outperform shaped refractories (bricks) in all major properties.
With approximately 50 items of raw materials we produce about 10000 tons per year of mixtures and products with a wide range of properties, with a temperature of 2000 0C, with a density of 0.4 g/cm3 to 3.5 g/cm3, the strength up to 150 N/mm2, containing up to 99.8% Al2O3.
From a wide range of concretes produced by us is always possible to choose the material best suited to the specific operating conditions with the optimum combination of fire resistance, heat resistance, thermal conductivity, strength.
Mixtures can be applied pouring, vibroformovaniem, gunning packing. We can manufacture at our manufacturing products the most complex configuration with a mass of several kilograms to 10-15 tons.
Our refractories for many years successfully operated on hundreds of companies in various industries.
Products manufactured in accordance with the specifications, has hygiene certificates. Each lot is accompanied by a certificate of quality and the instructions for use. The production has all necessary licenses. We design and furnace linings, advise on selection of refractory compounds, provide technical assistance in the lining works.
Quality Policy Inteco Limited
To achieve the goals we set ourselves the following objectives:
the output of consistent quality that meets the requirements and expectations of customers;
development and implementation of new processes and technologies;
development of mutually beneficial and long-term cooperation with partners;
the creation and use of monitoring systems to measure and evaluate customer satisfaction and loyalty the company's products;
systematic training and competence of all personnel;
The solution of these problems is provided by the following principles:
Inteco Limited product quality is determined by the needs of the client;
study of its needs and expectations can anticipate and overcome them;
continuous analysis and improvement of production processes and provide superior quality products has been increasing steadily Inteco Limited;
| Company Name | Inteco Limited |
|---|---|
| Business Type | Manufacturer, Trading Company |
| Main Products | anthracite,coal,refractory castables,castables,refractory |
| Country/Region | Hong Kong |
| Contact Person | Ms. Inteco Limited |
| Telephone | 8************1 View all, please login |
| Street Address | Tai Yau Street |
| sell123 URL | http://www.sell123.org/company/Hong-Kong/1262561.htm |
Suppliers By Region
- In Hong Kong
- Kowloon ...(96)
- Sheung Wan(96)
By Business Type
- In Hong Kong
- Manufacturer(19585)
- Trading Company(14049)
- Wholesaler(6241)
- Agent(3010)
- Buyer(2312)
Related Suppliers By Main Products
| coal (2021) | Hong Kong (39) | AM Trading Company Hong KongGolden Pegasus International Ltd.Good Power Asia Pacific Limited |
|---|