Copper Tech & Alloy Pvt Ltd

Copper Tech & Alloy Pvt Ltd is as the path finder copper plumbing tubes manufacturer, supplier located in India. We are engrossing in the manufacture of Copper Nickel Tubes, Copper Coils, Copper Brass Tubes, Cupro Nickel Tubes, PVC Coated Copper Tubes, Copper Square Tubes, Brass Square Tubes, Copper Earthing Rods, Copper Sleeves, Brass Sleeves, Fin Tubes & Copper Fittings for a wide spectrum of customers and uses state of the art facilities and constant and sustained research in emerging cutting edge techniques to consistently create high quality products at hard to beat prices. Tube Tech ensures adherence to the respective standards and caters to specific customer's requirements. Our products are always in the upper range of expected quality, aggressively priced and coupled with excellent service.

The mechanical and dimensional characteristics of our products satisfy the most demanding orders that require tight tolerances. No wonder we have an impeccable record of customer satisfaction and our customers rest assured in the knowledge that while we do everything we can, to achieve Total Customer Satisfaction we are ourselves never truly satisfied, a characteristic which is the prime mover in spawning bigger bolder better products for our customers today and tomorrow.

QUALITY CONTROL

It is the stringent regime of quality controls and procedures established at Tube Tech that gives its products the critical advantage in the industry. Strict process requirements and continuous monitoring throughout the production process minimizes the range of possible deviations in the final output. The works have been equipped with reliable testing and measuring equipment for destructive and non destructive testing.

Destructive Tests:
Flaring Test

The flaring test serves to establish the forming behavior of tubes or pipes which is expanded to a specific degree. This flaring test is carried out in conformity with the code requirements. The specimen to be tested is expanded in a press to the degree specified. Defects which occur as result of this process are not permissible.

Hardness Test
Samples from each lot are tested to ensure that the hardness of the tube is within permissible limits.

Tensile Test

The tensile test specimen serves to determine the strength and ductility characteristics i.e. yield strength, tensile strength and elongation. Tensile tests are normally carried out at room temperature according DIN, ASTM, BS, and other common standards.

Flattening Test
Flattening test mainly serves to detect microscopic internal and external flaws. It involves compressing a tube section between two planes placed parallel to a predetermined distance. Incipient cracks and internal or external defects which occur as result of this process are not permissible.

Non Destructive Tests:

Hydrostatic Tests

All tubes and pipes produced at Tube Tech are compulsorily subjected to 100% hydro testing. Hydrostatic Testing can be carried out at pressures upto 120 kg /cm sq. The test pressure is achieved using high pressure Triple Plunger pumps. If specified, customers or their deputed inspection agencies can witness 100% hydro testing at our plant.

Pneumatic Testing

For thin wall tubes Pneumatic Testing (Air under water) is done at up to 450 psi air pressure to check for any leakages in the tube.

Visual Inspection

All products at Tube Tech are subjected to 100% visual inspection.

Related Suppliers By Main Products

Copper Tube (125)	India	Copper Tech & Alloy Pvt LtdMETAL ALLOYS CORPORATIONNEO IMPEX STAINLESS PVT LTD