*Established in 1947. Largest market share in Japan for glass bottle molds.
*Products: glass bottle molds, plastic molds, glass press molds, hot glass-forming machinery, cold glass-working machinery, polishing machines, large sized part machining, precision machining, etc.
*ISO 9001-certified, member of Japan Die & Mold Industry Association
*Domestic and international business
Within Japan, we offer primarily glass bottle molds, plastic molds, glass press molds, hot glass-forming machinery, cold glass-working machinery, precision-machined parts, and large machined parts. At each of our factories in Sagamihara, Akita, Osaka, and Gifu, we manufacture molds tailored to a variety of needs for multiple sectors, a rare feat in the industry.
Internationally, we began exporting glass bottle molds to the Philippines in 1963, and business has been increasing steadily ever since. In 1972, we established Fuso International Limited as our point of contact for international business. We now have experience exporting to countries all over the world, especially in Asia.
*President's message:
Since our founding in 1947, we have maintained our focus on the manufacture of industrial goods for 66 years. Reflecting our long history exporting machinery and molds to users, we also have our own department that takes care of export procedures. Our factories, distributed among the Kanto, Kansai, Chubu, and Tohoku regions, all deliver their own unique technologies to the world while cooperating under the concept of "One Fuso." Despite Japan's decline in relative position as a result of the recent upswing in the yen, an aging population, and the rise of emerging nations, Fuso products are still being used in considerable numbers overseas while simultaneously undergoing transformation. Our technology is provided for professionals, by professionals, and we will continue to put it to the test while developing it even further.
1. Casting technology
2. Precision machining technology for round parts (fans, lenses, etc.)
3. Precision micromachining (simultaneous mold-filling, etc.)
4. Large turning machining (table diameter 2 m, maximum turning diameter up to 2.4 m)
5. Five-sided machining of large parts (portal width 5 m, table up to 4 m)
6. Special-order machinery, from conception to design and assembly, including programs
We welcome any inquiries you may have.
*Products: glass bottle molds, plastic molds, glass press molds, hot glass-forming machinery, cold glass-working machinery, polishing machines, large sized part machining, precision machining, etc.
*ISO 9001-certified, member of Japan Die & Mold Industry Association
*Domestic and international business
Within Japan, we offer primarily glass bottle molds, plastic molds, glass press molds, hot glass-forming machinery, cold glass-working machinery, precision-machined parts, and large machined parts. At each of our factories in Sagamihara, Akita, Osaka, and Gifu, we manufacture molds tailored to a variety of needs for multiple sectors, a rare feat in the industry.
Internationally, we began exporting glass bottle molds to the Philippines in 1963, and business has been increasing steadily ever since. In 1972, we established Fuso International Limited as our point of contact for international business. We now have experience exporting to countries all over the world, especially in Asia.
*President's message:
Since our founding in 1947, we have maintained our focus on the manufacture of industrial goods for 66 years. Reflecting our long history exporting machinery and molds to users, we also have our own department that takes care of export procedures. Our factories, distributed among the Kanto, Kansai, Chubu, and Tohoku regions, all deliver their own unique technologies to the world while cooperating under the concept of "One Fuso." Despite Japan's decline in relative position as a result of the recent upswing in the yen, an aging population, and the rise of emerging nations, Fuso products are still being used in considerable numbers overseas while simultaneously undergoing transformation. Our technology is provided for professionals, by professionals, and we will continue to put it to the test while developing it even further.
1. Casting technology
2. Precision machining technology for round parts (fans, lenses, etc.)
3. Precision micromachining (simultaneous mold-filling, etc.)
4. Large turning machining (table diameter 2 m, maximum turning diameter up to 2.4 m)
5. Five-sided machining of large parts (portal width 5 m, table up to 4 m)
6. Special-order machinery, from conception to design and assembly, including programs
We welcome any inquiries you may have.
Company Name | FUSO MACHINE & MOLD MFG. CO., LTD. |
---|---|
Business Type | Manufacturer, Trading Company |
Main Products | molds for glass bottle,Plastic molds (injection and blow),Glass press molds,Hot glass-forming machinery,Cold glass-working machinery |
Total No. Employees | 201 - 300 People |
Year Established | 1977 |
Annual Output Value | US$10 Million - US$50 Million |
Factory Location | 2-12-24, HASHIMOTODAI, MIDORI-KU, SAGAMIHARA, KANAGAWA 252-0132, JAPAN |
Factory Size | Above 100,000 square meters |
Contract Manufacturing | OEM Service Offered |
No. of Production Lines | Above 10 |
Total Annual Sales Volume | US$10 Million - US$50 Million |
Export Percentage | 21% - 30% |
Main Markets | 70.00% Domestic Market,20.00% Eastern Asia,5.00% Western Europe,3.00% North America,2.00% Oceania |
No. of Employees in Trade Department | 1-2 People |
Nearest Port | Yokohama,Tokyo,Narita Airport |
Average Lead Time | 30 Day(s) |
Accepted Delivery Terms | FOB, CFR, CIF, EXW, CIP, FCA, CPT, DDU, Express Delivery |
Accepted Payment Currency | JPY |
Accepted Payment Type | T/T |
Language Spoken | English, Japanese |
City | Sagamihara-shi |
Province/State | Kanagawa |
Country/Region | Japan |
Company Website | http://www.fuso-seiko.co.jp http://www.fuso-seiko.co.jp/international/en/index.html |
Contact Person | Toshihide Iwasaki |
Gender | Mr. |
Job Title | CEO |
Telephone | 8***********7 View all, please login |
Fax | 81-42-7741102 |
Street Address | 2-12-24, Hashimotodai, Midori-ku |
Zip Code | 252-0132 |
sell123 URL | http://www.sell123.org/company/Japan/1400125.htm |
Suppliers By Region
- In Kanagawa
- Yokohama...(50)
By Business Type
- In Sagamihara-shi
- In Kanagawa-Ken
- In Japan
- Manufacturer(2749)
- Trading Company(2593)
- Wholesaler(2208)
- Agent(602)
- Buyer(317)