As demonstrated in our company name, PLASTic TEChnology of ECOlogy, PLASTECO provides environmentally friendly plastic goods and manufacturing equipment using the latest technology.
Where regulatory usage restrictions have made the use of plastic products and production processes difficult, we provide solutions using environment-conscious engineering methods.
We are continually pursuing research and development to provide the latest techniques, and provide such unique techniques and equipment as supercritical inert gas foaming processes and ultra-thin PET bottle filling systems, which are not found elsewhere in the world.
Using our company's technology in each field, we can provide everything necessary for the supercritical foam extrusion molding process using carbon dioxide and nitrogen as foaming agents, including equipment, processes, and raw material mixtures.
In recent years, the number of cities and countries banning PS products has been increasing. Instead of using Freon and petroleum-based foaming agents, which have a bad impact on the environment, biodegradable resin and polylactic acid (PLA) can be used to produce foam products using a technique to foam PLA to the same extent as PSP. Using this process, environmentally conscious products can be produced to be almost as convenient as conventional plastic products.
Additionally, using supercritical inert gas foaming, it is possible to obtain foams with characteristics such as extremely minute bubble structure. The process is highly promising for production methods using new materials, which were not possible to implement using traditional materials.
The ultra-thin PET bottle molding/filling system is an integrated system that molds PET bottles that are approximately 7 g, which is extremely lightweight and thin-walled, being around 1/2 to 1/3 the weight of conventional bottles. The system also fills bottles with liquids such as water, attaches labels, and prints on the bottles.
This does not only reduce the amount of resin used, but also makes reducing the volume of the used, empty bottles extremely easy, thus reducing the environmental impact throughout the bottle's life cycle.
Where regulatory usage restrictions have made the use of plastic products and production processes difficult, we provide solutions using environment-conscious engineering methods.
We are continually pursuing research and development to provide the latest techniques, and provide such unique techniques and equipment as supercritical inert gas foaming processes and ultra-thin PET bottle filling systems, which are not found elsewhere in the world.
Using our company's technology in each field, we can provide everything necessary for the supercritical foam extrusion molding process using carbon dioxide and nitrogen as foaming agents, including equipment, processes, and raw material mixtures.
In recent years, the number of cities and countries banning PS products has been increasing. Instead of using Freon and petroleum-based foaming agents, which have a bad impact on the environment, biodegradable resin and polylactic acid (PLA) can be used to produce foam products using a technique to foam PLA to the same extent as PSP. Using this process, environmentally conscious products can be produced to be almost as convenient as conventional plastic products.
Additionally, using supercritical inert gas foaming, it is possible to obtain foams with characteristics such as extremely minute bubble structure. The process is highly promising for production methods using new materials, which were not possible to implement using traditional materials.
The ultra-thin PET bottle molding/filling system is an integrated system that molds PET bottles that are approximately 7 g, which is extremely lightweight and thin-walled, being around 1/2 to 1/3 the weight of conventional bottles. The system also fills bottles with liquids such as water, attaches labels, and prints on the bottles.
This does not only reduce the amount of resin used, but also makes reducing the volume of the used, empty bottles extremely easy, thus reducing the environmental impact throughout the bottle's life cycle.
| Company Name | PLASTECO CORPORATION |
|---|---|
| Business Type | Manufacturer, Business Service (Transportation, finance, travel, Ads, etc) |
| Main Products | Quantitative supercritical carbon dioxide feeder,Quantitative supercritical nitrogen feeder,Supercritical inert gas foam extruder,Supercritical inert ... |
| Total No. Employees | 5 - 10 People |
| Nearest Port | Kobe, Shanghai, Kaohsiung |
| City | Ikeda-shi |
| Province/State | Osaka |
| Country/Region | Japan |
| Company Website | http://www.plastecocorp.com/ |
| Gender | Mr. |
| Telephone | 8***********5 View all, please login |
| Fax | 81-72-7376254 |
| Street Address | 1-8-23, Jonan |
| Zip Code | 563-0025 |
| sell123 URL | http://www.sell123.org/company/Japan/1492213.htm |
Suppliers By Region
- In Osaka
- Osaka-shi(202)
- Higashio...(42)
- Osaka-shi,(35)
By Business Type
- In Ikeda-shi
- In Osaka
- Manufacturer(385)
- Trading Company(325)
- Wholesaler(288)
- Agent(60)
- Buyer(38)
- In Japan
- Manufacturer(2749)
- Trading Company(2593)
- Wholesaler(2208)
- Agent(602)
- Buyer(317)