Is a sign made of our patented product, photo luminous acrylic(Plexiglas)which stores energy from light in brightness and emits it back as light in darkness, thus glowing in darkness.
Power cuts that occur in buildings in cases of fires, earthquakes and other such incidents make it necessary that signs showing escape routes and equipment which can be necessary at such times be illuminated by independent power supplies. Signs, because of the natural properties of the materials used in their production as explained above, do not require any such illumination. That eliminates the disadvantages of independent illumination, such as independent power sources including rechargeable batteries, internal charger units, cabling, periodical maintenance and teh risk of malfunction. Moreover;
Acrylic is a material that does not allow survival of micro organisms on its surface. It can be used in places like hospitals, kindergartens etc. Where hygiene is a concern. It is not affected by standard cleaning agents like detergents, soap etc.
Photo luminous materials are not applied to out signs externally by means of painting or sticking foils but have been embedded directly to the sign itself. Therefore, cracks or breaks on the sign do not prevent it from emitting light. Problems like cracks and breaks on the luminous layers of signs made of luminous foils and paints do not occur on signs.
Our signs are suitable for marine applications. They are not affected by humidity and seawater.
Our photo luminous materials do not include phosphor. Therefore our signs; are not hazardous to health in their production and usage.
Glow much brighter and last much longer than phosphor.
Are not affected by UV beams in sunlight. Unlike phosphor, they can be used in open air with a long lifetime.
Installation
Our signs come with double-sided sticker tapes at the back. For installation, simply remove the protective paper of the sticker tape and press the sign onto teh surface where it will be installed. A smooth surface would strengthen the installation but as long as the surface is dry and clean you can safely install our signs even on surfaces like rough walls. Make sure you install it correctly and on the exact spot you want since the sticker tape cannot be used again once it has been installed.
Power cuts that occur in buildings in cases of fires, earthquakes and other such incidents make it necessary that signs showing escape routes and equipment which can be necessary at such times be illuminated by independent power supplies. Signs, because of the natural properties of the materials used in their production as explained above, do not require any such illumination. That eliminates the disadvantages of independent illumination, such as independent power sources including rechargeable batteries, internal charger units, cabling, periodical maintenance and teh risk of malfunction. Moreover;
Acrylic is a material that does not allow survival of micro organisms on its surface. It can be used in places like hospitals, kindergartens etc. Where hygiene is a concern. It is not affected by standard cleaning agents like detergents, soap etc.
Photo luminous materials are not applied to out signs externally by means of painting or sticking foils but have been embedded directly to the sign itself. Therefore, cracks or breaks on the sign do not prevent it from emitting light. Problems like cracks and breaks on the luminous layers of signs made of luminous foils and paints do not occur on signs.
Our signs are suitable for marine applications. They are not affected by humidity and seawater.
Our photo luminous materials do not include phosphor. Therefore our signs; are not hazardous to health in their production and usage.
Glow much brighter and last much longer than phosphor.
Are not affected by UV beams in sunlight. Unlike phosphor, they can be used in open air with a long lifetime.
Installation
Our signs come with double-sided sticker tapes at the back. For installation, simply remove the protective paper of the sticker tape and press the sign onto teh surface where it will be installed. A smooth surface would strengthen the installation but as long as the surface is dry and clean you can safely install our signs even on surfaces like rough walls. Make sure you install it correctly and on the exact spot you want since the sticker tape cannot be used again once it has been installed.
| Company Name | BIALITE |
|---|---|
| Business Type | Manufacturer |
| Main Products | Safety Products |
| Total No. Employees | 5 - 10 People |
| City | Bursa |
| Province/State | BURSA |
| Country/Region | Turkey |
| Contact Person | Ms. EBRU CAM |
| Telephone | 9************0 View all, please login |
| Fax | 90-224-2714682 |
| Street Address | Izmir Yolu |
| Zip Code | 16250 |
| sell123 URL | http://www.sell123.org/company/Turkey/1099194.htm |
Suppliers By Region
- In Turkey
- Izmir(1345)
- Ankara(937)
- Bursa(625)
- Konya(565)
- Adana(374)
- Gaziantep(311)
- Kayseri(287)
- Kocaeli(287)
- Antalya(259)
- Marmara(248)
- Mersin(237)
- Turkiye(124)
- Aydin(114)
- Aegean R...(112)
- Aegean(107)
- manisa(103)
- Kadikoy(97)
- Mugla(95)
- Selcuklu(82)
- Umraniye(82)
- AKSARAY(79)
- Tekirdag(79)
- Ege(78)
- Sakarya(74)
- balikesir(66)
- Eskisehir(64)
- Sisli(60)
- OSMANGAZI(59)
- Seyhan(51)
- Melikgazi(49)
- samsun(46)
- Malatya(39)
- Karaman(37)
- --(35)
By Business Type
- In Bursa
- Manufacturer(494)
- Trading Company(221)
- Wholesaler(112)
- In Turkey
- Manufacturer(21182)
- Trading Company(12556)
- Wholesaler(5977)
- Agent(2472)
- Buyer(1414)
Related Suppliers By Main Products
| Safety Products (376) | Turkey | Armaplast Composites & PlasticsOXI Co.Ltd.Elsan Eldiven |
|---|