Celebrating 27 years of business in 2008
To God be the Glory!
Here at Hartco we strive to serve our customers so as to make them our biggest fans. This is done by aligning our services and manufacturing capabilities with our customer's unique needs. Most of our customers have been "family" for many years and trust us to keep their best interests at heart. Our Vision and Values reflect the core of why we do what we do. The long term relationships we have built with we those serve are a testament to the timeless relevance and purpoe of these guiding principles.
As a Customer Driven Manufacturer of both Polymer Coated Products and Contract / OEM Die Cutting, we have been blessed to serve the automotive, cleanroom, sporting goods, signage, computer, construction, filtration, home appliance, aerospace, communications, medical and occupational therapy markets. Our 40, 000 square foot facility located in Cincinnati, Ohio USA houses our entire operation from which we service our customers throughout the world in North, Central and South America; Europe; Asia; Africa and Australia.
CAST OR COATED VINYL: We develop vinyl formulae for both our internal needs and the needs of our customers. After formulating and blending, we cast or coat and fully cure all our vinyl products for maximum consistency, strength and stability. The casting process consistently produces higher quality products than the more commonly used calendering process. Our system incorporates multiple stations allowing for the infusion of fabric or other supporting materials as well as applying water based acrylic adhesives. If required, the vinyl can be slit to the desired width and cut to length or left as Master Rolls.
Capabilities:
* Formulate, mix, cast, cure and re-roll in one continuous operation
* Slit to desired width and cut to length
* Maximum web width: 64"
* Maximum useable width: 63"
* Minumum thickness: 3 mils + / -. 5 mils
* Maximum thickness: 150 mils + / -2 mils
* Maximum roll diameter: 36"
* Maximum roll width for slitting: 70"
CONTRACT / OEM DIE CUTTING: 2 flatbed NC automatic die cutters plus slitters and re-rollers provide maximum production, efficiency, cost effectiveness and quality for virtually any project or application. Die cutters have up to 38 ton capacity for thick or dense materials as well as multiple sheet or layer requirements. 30 roll load-up stand allows for a single load-up of up to 30 rolls to minimize time and related costs. Single, multiple and common edge dies are used to maximize yield. Dies are computer matched, when applicable, to optimize consisitency and minimize scrap. You can supply the raw materials or we will either manufacture or source them for you. Both raw materials and finished goods can be warehoused on site for immediate production, load-up or shipment (subject to conditions) .
Capabilities:
* Maximum die size: # 1ADC: 18. 5" x 18. 5"# 2ADC: 18. 5" x 24. 5"
* Maximum web width: # 1ADC: 65"# 2ADC: 68"
* Minumum thickness: sufficient strength to be able to be pulled
* Maximum thickness: undetemined
* Maximum roll diameter: 32"
* Maximum roll weight: 2, 000 pounds
Examples of materials we can die cut:
Cork Fiber HDPE Laminated Filters Adhesive Backed Rubber Textile
Felt Foam Paper Leather Mylar (R) Non-Metallic Sponge Vinyl
Hartco: is ISO9001: 2000 Certified for quality control; has implemented Through Put Manufacturing for maximum production and cost controls; has developed and implemented a 6 Sigma Program for continuous improvement and 5S for efficiency and cleanliness. All these initiatives have helped us move closer to our main goals of being the best stewards of and servants to our customers.
We look forward to having the opportunity to serve you and to prove we offer the highest Quality with unexcelled Service at a competitive price to provide you with the best Value.
To God be the Glory!
Here at Hartco we strive to serve our customers so as to make them our biggest fans. This is done by aligning our services and manufacturing capabilities with our customer's unique needs. Most of our customers have been "family" for many years and trust us to keep their best interests at heart. Our Vision and Values reflect the core of why we do what we do. The long term relationships we have built with we those serve are a testament to the timeless relevance and purpoe of these guiding principles.
As a Customer Driven Manufacturer of both Polymer Coated Products and Contract / OEM Die Cutting, we have been blessed to serve the automotive, cleanroom, sporting goods, signage, computer, construction, filtration, home appliance, aerospace, communications, medical and occupational therapy markets. Our 40, 000 square foot facility located in Cincinnati, Ohio USA houses our entire operation from which we service our customers throughout the world in North, Central and South America; Europe; Asia; Africa and Australia.
CAST OR COATED VINYL: We develop vinyl formulae for both our internal needs and the needs of our customers. After formulating and blending, we cast or coat and fully cure all our vinyl products for maximum consistency, strength and stability. The casting process consistently produces higher quality products than the more commonly used calendering process. Our system incorporates multiple stations allowing for the infusion of fabric or other supporting materials as well as applying water based acrylic adhesives. If required, the vinyl can be slit to the desired width and cut to length or left as Master Rolls.
Capabilities:
* Formulate, mix, cast, cure and re-roll in one continuous operation
* Slit to desired width and cut to length
* Maximum web width: 64"
* Maximum useable width: 63"
* Minumum thickness: 3 mils + / -. 5 mils
* Maximum thickness: 150 mils + / -2 mils
* Maximum roll diameter: 36"
* Maximum roll width for slitting: 70"
CONTRACT / OEM DIE CUTTING: 2 flatbed NC automatic die cutters plus slitters and re-rollers provide maximum production, efficiency, cost effectiveness and quality for virtually any project or application. Die cutters have up to 38 ton capacity for thick or dense materials as well as multiple sheet or layer requirements. 30 roll load-up stand allows for a single load-up of up to 30 rolls to minimize time and related costs. Single, multiple and common edge dies are used to maximize yield. Dies are computer matched, when applicable, to optimize consisitency and minimize scrap. You can supply the raw materials or we will either manufacture or source them for you. Both raw materials and finished goods can be warehoused on site for immediate production, load-up or shipment (subject to conditions) .
Capabilities:
* Maximum die size: # 1ADC: 18. 5" x 18. 5"# 2ADC: 18. 5" x 24. 5"
* Maximum web width: # 1ADC: 65"# 2ADC: 68"
* Minumum thickness: sufficient strength to be able to be pulled
* Maximum thickness: undetemined
* Maximum roll diameter: 32"
* Maximum roll weight: 2, 000 pounds
Examples of materials we can die cut:
Cork Fiber HDPE Laminated Filters Adhesive Backed Rubber Textile
Felt Foam Paper Leather Mylar (R) Non-Metallic Sponge Vinyl
Hartco: is ISO9001: 2000 Certified for quality control; has implemented Through Put Manufacturing for maximum production and cost controls; has developed and implemented a 6 Sigma Program for continuous improvement and 5S for efficiency and cleanliness. All these initiatives have helped us move closer to our main goals of being the best stewards of and servants to our customers.
We look forward to having the opportunity to serve you and to prove we offer the highest Quality with unexcelled Service at a competitive price to provide you with the best Value.
Company Name | Hartco, Inc. |
---|---|
Business Type | Manufacturer |
Main Products | Unsupported And Supported Cast PVC Vinyl, Die Cutting Services, Sandblasting Stencil, Tack Regenerating Clean Room Flooring, Uncoated And Coated Textiles |
Total No. Employees | 11 - 50 People |
Company Certification | ISO 9001:2000 Others |
Factory Location | Cincinnati, Ohio USA |
Factory Size | 3,000-5,000 square meters |
Contract Manufacturing | OEM Service Offered Buyer Label Offered |
No. of Production Lines | 6 |
Total Annual Sales Volume | US$5 Million - US$10 Million |
Export Percentage | 21% - 30% |
City | Cincinnati |
Province/State | Ohio |
Country/Region | United States |
Company Website | http://www.hartcoservice.com |
Contact Person | Mr. Steve Alexander |
Telephone | 0**************0 View all, please login |
Fax | 010-513-771-3327 |
Street Address | 1280 Glendale Milford Rd |
Zip Code | 45215 |
sell123 URL | http://www.sell123.org/company/United-States/390654.htm |
Suppliers By Region
- In Ohio
- Cleveland(190)
- Cincinnati(128)
- Dayton(62)
- Franklin(61)
- Akron(45)
- bridgeport(37)
- WEST CHE...(34)
- clarksvi...(32)
- High Point(32)
- In United States
- California(14022)
- Florida(7923)
- New York(6483)
- Texas(5295)
- New Jersey(3044)
- Illinois(2720)
- Georgia(2497)
- Pennsylv...(1826)
- Ohio(1685)
- Michigan(1627)
- Washington(1442)
- North Ca...(1440)
- Virginia(1313)
- Arizona(1278)
- Massachu...(1264)
- Maryland(1231)
- Nevada(936)
- Colorado(846)
- Indiana(818)
- Missouri(779)
- Minnesota(737)
- Tennessee(728)
- Oregon(708)
- Alabama(688)
- Connecti...(677)
- Wisconsin(652)
- South Ca...(651)
- Utah(524)
- Louisiana(484)
- Oklahoma(416)
- Kentucky(409)
- Kansas(345)
- Arkansas(339)
- Hawaii(298)
By Business Type
- In Cincinnati
- Manufacturer(39)
- Trading Company(30)
- Wholesaler(50)
- In Ohio
- Manufacturer(488)
- Trading Company(354)
- Wholesaler(737)
- Agent(155)
- Buyer(98)
- In United States
- Manufacturer(19783)
- Trading Company(17220)
- Wholesaler(31825)
- Agent(7715)
- Buyer(4045)